首页 期刊 材料热处理学报杂志 2004年第05B期
材料热处理学报

材料热处理学报杂志 北大期刊 CSCD期刊 统计源期刊

Transactions of Materials and Heat Treatment

杂志简介：《材料热处理学报》杂志经新闻出版总署批准，自1980年创刊，国内刊号为11-4545/TG，是一本综合性较强的工业期刊。该刊是一份月刊，致力于发表工业领域的高质量原创研究成果、综述及快报。主要栏目：综述、有色金属合金材料、黑色金属合金材料、材料表面改性、材料模拟计算、其他

主管单位：中国科学技术协会
主办单位：中国机械工程学会
国际刊号：1009-6264
国内刊号：11-4545/TG
全年订价：¥ 820.00
创刊时间：1980
所属类别：工业类
发行周期：月刊
发行地区：北京
出版语言：中文
预计审稿时间：1-3个月
综合影响因子：0.79
复合影响因子：0.69
总发文量：4395
总被引量：23581
H指数：34
引用半衰期：5.929
期刊他引率：0.736
平均引文率：13.7741
发表咨询 加急见刊 立即订阅
期刊首页
分期目录

  • Pack Aluminide Coatings Formed at 650℃ for Enhancing Oxidation Resistance of Low Alloy Steels

    作者：Z.D.Xiang; S.R.Rose; P.K.Datta 刊期：2004年第05B期

    This study aims to investigate the feasibility of forming iron aluminide coatings on a commercial 9Cr-lMo (wt.%)alloy steel by pack cementation at 650 ℃ in an attempt to improve its high temperature oxidation resistance. Pack powders containing Al, Al2O3 and a series of halide salts were used to carry out the coatin...

  • Diffusion Carbide Layers, Formed on the Surface of Steel in the Vacuum Titanizing Process

    作者：KASPRZYCKAEwa; SENATORSKIJan; NAKONIECZNYAleksander; BABULTomasz 刊期：2004年第05B期

    Diffusion layers produced on carbon steel surface in vacuum titanizing process were investigated. Studies of layers thickness, their morphology, titanium, carbon and iron concentration depth profiles in the diffusion zone of titanized layers were carried out. The effect of process parameters such as time and temperat...

  • Study on Friction and Wear Characteristics and Structure of Compound Layer from Combined Treatment of Ion Nitrocarburizing-Ion Sulphurizing of CrMoCu Alloy Cast Iron

    作者：MAShi-ning; HUChun-hua; LIXin; QIUJi 刊期：2004年第05B期

    The technics of combined treatment of ion nitrocarburizing-ion sulphurizing of CrMoCu alloy cast iron has been investigated and the compound layer with nitrocarbonide and sulphide has been made on the surface of CrMoCu alloy cast iron. The compound layer is composed of sulfide surface layer and the nitrocarbonide hyp...

  • Complex Boronized Layer on the Hot-dip Aluminized Steels and Its Surface Performances

    作者：LUOXin-min; LIDian-kai; WANGLan; CHENKang-min 刊期：2004年第05B期

    Plain carbon steels were dipped in molten aluminum bath at 720℃±5℃ and diffused for 1, 2.5 and 6 hours respectively and then boronized at 950℃ for 6 hours. The oxidation, hot-corrosion and abrasion resistance behavior were examined. The experimental results showed the compounds of the aluminized layer, from the su...

  • Formation and Microstructural Characterization of Silicon-modified Aluminide Coating on Nickel-based Superalloy IN738LC

    作者：F.Shahriari; F.Ashrafizadeh; A.Monshi 刊期：2004年第05B期

    In this investigation, aluminide coatings used to protect industrial components at high temperature and corrosive environments were modified with silicon addition and the microstructural features and formation mechanism were evaluated. The coating on the nickel-based superalloy IN738LC was carried out by a two stage ...

  • Formation and Characterization of Titanium Modified Aluminide Coatings on IN738LC

    作者：MohammadMoradi; FakhreddinAshrafizadeh 刊期：2004年第05B期

    Up to now, the aluminide coatings used to protect industrial components at high temperature and corrosive environments have been modified by Pt, Cr, Si and Ni. In this investigation, aluminide coatings were modified by titanium and the microstructural feature and formation mechanism were evaluated. The coatings were ...

  • The Effect of NiAI Coatings on Oxidation Behavior of AISI 403 Stainless Steel

    作者：M.Ebrahimianl; F.Ashrafizadeh 刊期：2004年第05B期

    This paper reports the oxidation behavior of stainless steel type 403 as a substrate material with and without NiAl coating. Evaluation of oxidation resistance was performed on uncoated and coated specimens at 850 and 1050℃. Acommercial diffusion process was used for the formation of NiA1 intermetallic coatings on t...

  • Double Glow Plasma Surface Alloyed Burn-resistant Titanium Alloy

    作者：ZHANGPing-ze; XUZhong; HEZhi-yong; ZHANGGao-hui 刊期：2004年第05B期

    Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity condition. In order to avoid this problem, we have developed a new kind of burn-resistant titanium alloy-double glow plasma surface alloying burn-resistant titanium alloy. Alloying element Cr, Mo, Cu ...

  • Quantitative Analysis on Carbon Migration in Double-Glow Discharge Plasma Surface Alloying Process

    作者：ZHANGZhen-xia; WANGCong-zeng; ZHANGWen-quan; SUXue-kuan 刊期：2004年第05B期

    Carbon migration is of great significance in double-glow discharge plasma surface alloying process, but literature of quantitative analysis about carbon migration is relatively scarce. In this paper differential equations of the carbon and metal concentration distribution were established. By means of differential eq...

  • Study on the Components and Performance of GCr15 Bearing Steel Surface by Gas Multi-elements Penetrating

    作者：ZHOUHai; CHENFei; YAOBin; ZHANGJian-jun; CHENLi 刊期：2004年第05B期

    Gas multi-elements Penetration is a new surface hardening technology to improve the performance of the surface.In this paper, we focus on the study on the influence of multi-elements penetration on hardness of GCr15 bearing steel surface by C-N-O multi-elements penetrating treatment, and analyze the three elements, C...

  • Study on the Formation Mechanism of the Solid Siliconized Layer on Ti-48Al Alloy

    作者：MAXiao-xia; LIANGWei; ZHAOXing-guo; SHIJu-yan; BIANLi-ping 刊期：2004年第05B期

    The microstructures of the siliconized specimens of Ti-48Al alloy were analyzed by SEM equipped with XEDS.The specimens were pack siliconized with the two different cementations, 15%Si+85% Al2O3 and 15%Si+85%ZrO2. The results show that a composite siliconized layer is formed on the surface of the TiAl alloy. The oute...

  • Ti Coating on Magnesium Alloy by Arc-Added Glow Discharge Plasma Penetrating Technique

    作者：CUICai-e; MIAOQiang; PANJun-de; ZHANGPing-ze; ZHANGGao-hui 刊期：2004年第05B期

    Arc-added glow discharge plasma penetrating technique is a new surface coating method. With the help of vacuum arc discharge, a cold cathode arc source continually emits ion beams of coating elements with high currency density and high ionizing ratio. As the ion bombard and diffusion working on, the surface of the pa...

  • W, Mo, Co Co-diffusion on Steel with Different Carbon Content

    作者：ZHANGYan-mei; LIZhong-hou; LIUYan-ping; XUZhong 刊期：2004年第05B期

    Tungsten, molybdenum and cobalt were co-diffused into the surface of ingot, 20 steel, 45 steel and T8 steel by a double glow plasma surface alloying technique. Surface alloyed layers formed on ingot and 20 steel are composed of α -Fe +(Fe,Co)7(W, Mo)6, which possess the same strong age-hardening ability as the metall...

  • A Controlled New Process of Pack Aluminization

    作者：HUANGZhi-rong; MALiu-bao; LIPei-ning; XUHong 刊期：2004年第05B期

    Aluminum diffusion coatings are often prepared by a pack aluminization technique, which is a specific variety of chemical vapor deposition (CVD) method. The coating process takes place in a bed containing a mixed powder that serves as a source of the coatings forming element. The phase composition of the diffusion la...

  • An Research on Abrasion Resistance of Muzzle Shunt Rail Gun Rail Boronized with Self-protecting B4C Paste

    作者：HUJin-suo; CHENGShu-kang; ZHENGZhen-zhong; MAYuan; LIZhi-yuan 刊期：2004年第05B期

    Based on large numbers of experiments, together with some theoretic support such as equations related to the experiment, thermodynamic principles and so on, one useful and reasonable self-protecting boron formulation is got to reinforce the muzzle shunt rail gun rail. The preliminary friction and abrasion test result...

相关文章

材料与建筑工程论文 材料专业毕业论文 材料专业论文 材料主管工作总结 材料产业调查报告 材料会计工作计划 材料供应合同范本 材料供货合同范本 材料保护论文 材料化学专业导论论文 材料化学工程论文 材料化学教学
相关期刊