摘要：Load of an automatic feed mechanism is composed of the stretching force of feed belt at the entrance to lower flexible guidance and the friction force between feed belt and flexible guidance. A mathematical model for computing the load was presented. An optimization problem was formulated to determine the attitude of the flexible guidance based on the principle that the potential energy stored in the system was the minimum at the equilibrium. Then the friction force was obtained according to the attitude of guide leaves and the moving velocity of the feed belt and the friction factor. Consequently, the load of the automatic feed mechanism can be calculated. Finally, an example was given to compute the load when the horizontal and elevating firing angles of the automation were respectively 45° and 30°. The computing result can be a criterion to determine the designing parameters of automat.

注：因版权方要求，不能公开全文，如需全文，请咨询杂志社